QLD Licence 90899 · Switchboard upgrades since 2016
Need a Switchboard Upgrade Brisbane homeowners trust? Still running a ceramic fuse board? SEQ Sparky replaces old switchboards with modern RCD-protected boards that meet AS/NZS 3000. Fully licensed, fully insured, quoted on site by Anthony. Same week availability across Brisbane Southside.
Serving homes across Brisbane Southside, Logan and Redlands.
Your switchboard still has ceramic fuses instead of modern circuit breakers. These were standard in homes built before the 1980s and cannot handle what modern households demand.
Your board has no RCD safety switches. Queensland law requires safety switches on all power point circuits for property sales and new leases. Without them, there is no protection against electrocution.
Your power keeps tripping or cutting out when you run multiple appliances. Air conditioning, induction cooktops, EV chargers and home offices all draw more than older boards can supply.
You are preparing a property for sale, putting it on the rental market or doing a major renovation. Safety switch compliance is mandatory and most older boards need a full upgrade to meet the requirement.
A Switchboard Upgrade Brisbane homes need is usually overdue. Most Brisbane homes built before 2000 are running boards that are no longer fit for purpose.
Ceramic fuse boards degrade over decades. The fuse wire can be replaced with the wrong rating, connections loosen and wiring insulation breaks down. A modern switchboard removes the fire risk entirely.
The Electrical Safety Regulation 2013 (Qld) requires safety switches on all power point circuits before a property sale or new lease. If your board cannot fit safety switches, a full Switchboard Upgrade Brisbane homeowners need is the only option.
If your lights flicker when the air conditioning starts or your circuits trip when you run the kettle and the microwave at the same time, your board is overloaded. A new switchboard with properly rated circuit breakers and dedicated circuits fixes this permanently.
Solar panels, battery systems, EV chargers and ducted air conditioning all need dedicated circuits and spare capacity on the board. Upgrading now means your switchboard is ready for what you add next without paying for a second upgrade.
Up to 12 circuits · typical 2 to 3 bedroom home
12 to 20+ circuits · 4+ bedroom, two storey or granny flat
Three phase · heritage Queenslanders · retail and office
Final price depends on your board size, access and current wiring condition. Anthony inspects on site and quotes in writing within 24 hours. Most upgrades are completed in a single day with power restored before 5pm.
Every upgrade is completed to current AS/NZS 3000 standards and includes all of the following. No surcharges, no upsells on the day.
Required for insurance, property sales and QLD compliance.
Protects every circuit from lightning strikes and grid spikes common across Brisbane summers.
Every circuit protected, not just power circuits. Lighting circuits too.
Board, breakers, RCDs, surge protection, labels, wiring. Fixed price covers the lot.
Anthony does the work personally. Not an apprentice. Not a subbie. Not a call centre dispatch.
Labour warranty on the install plus full manufacturer warranty on the board and components.
Anthony, Owner and Licensed Electrician · QLD Licence 90899
Straightforward, predictable, done in a day.
Anthony comes out, inspects your existing board, checks cable condition and sends you a detailed fixed price written quote within 24 hours. No obligation, no pressure.
Pick a day that works. Most residential upgrades are finished in a single day. Anthony gives you a firm start time and power back on time before the van arrives.
New compliant board installed. RCDs on every circuit. Surge protection fitted. Circuits relabelled clearly. Anthony does the work himself, not an apprentice.
Every circuit tested, Certificate of Electrical Safety issued on the spot and Anthony walks you through the new board before he leaves. Questions answered, warranty explained, done.
Real switchboards, real homes, real compliance certificates. Every job photographed on site.
Old fuse board to full compliance upgrade · Brisbane Southside
New Hager switchboard with RCD safety switches · residential upgrade
Commercial distribution board upgrade with solar integration
Multi-tenancy meter board and switchboard upgrade
We service Queenslanders, brick and tile, townhouses and newer builds. Every housing era Brisbane has.
Straight answers on cost, timing, compliance and what is actually involved.
A standard residential switchboard upgrade takes between two and four hours. The power is off during the changeover but we keep the outage as short as possible. If your existing wiring needs repairs or additional circuits are required, the job may take slightly longer. We give you the expected timeframe when we quote so you can plan around it.
If your switchboard has ceramic fuses, no safety switches, scorch marks, a burning smell or it trips regularly when you run multiple appliances, it needs upgrading. You are not legally required to upgrade a working board just because it is old. However, Queensland law requires safety switches on all power point circuits before you sell or lease a property. If your board cannot fit safety switches, a full upgrade becomes mandatory.
A standard single phase switchboard upgrade costs between $2,500 and $3,500 ex GST. Larger homes with more circuits typically cost between $3,500 and $5,000 ex GST. Three phase switchboard upgrades start from $5,500 ex GST. The final price depends on the number of circuits, the condition of existing wiring and any additional surge protection or safety switches. You always get a fixed written quote before we start.
Yes. The power must be switched off while the old board is removed and the new one is installed. For a standard residential switchboard upgrade this is typically two to four hours. We schedule the work at a time that suits you and let you know exactly how long to expect. Every circuit is tested before the power goes back on.
Yes. Every switchboard upgrade receives a Certificate of Electrical Safety as required under Queensland electrical safety legislation. This certificate is lodged with the Electrical Safety Office and confirms the work meets AS/NZS 3000. You receive a copy for your records. This document is essential for insurance claims, property sales, rental compliance and any future electrical work on your home.
Queensland legislation requires safety switches on all power point circuits before a property can be sold. If your current switchboard cannot accommodate safety switches, a full upgrade is needed. This is one of the most common pre-sale electrical jobs we do across Brisbane Southside. We complete the upgrade, issue the Certificate of Electrical Safety and provide documentation for your conveyancer or real estate agent.
We install RCD safety switches on all power point circuits and lighting circuits. RCDs detect current leaking through a person’s body and cut the power in milliseconds to prevent electrocution. Every switchboard upgrade also includes modern circuit breakers rated for each individual circuit, a main switch for the entire property and clear labelling on every circuit. All components are Australian approved and meet AS/NZS 3000.
Yes. Every switchboard upgrade comes with a workmanship warranty on the installation plus the full manufacturer warranty on the board, circuit breakers, RCDs and surge protection devices. The Certificate of Electrical Safety also serves as your compliance record confirming the work meets Australian standards. If anything we installed develops a fault, we come back and fix it.
Yes. Queenslanders are one of the most common home types we work on across Brisbane Southside. Many still have original ceramic fuse boards from when they were built. The new switchboard is installed in the same location or repositioned if a better spot is available. If the existing wiring is in poor condition, we let you know during the inspection and can quote for a partial or full home rewire at the same time.
Yes. When we upgrade your switchboard, we can add dedicated circuits and spare capacity for solar panels, battery storage, EV chargers and ducted air conditioning. Planning ahead means you pay for one upgrade instead of two. Let us know what you are planning and we size the new board to handle it from day one.
Fixed price quote within 24 hours. Most upgrades completed in a single day. Certificate issued on site. Call Anthony directly, no call centre, no middleman, no runaround.
Available Monday–Friday 7am–5pm · Emergency callouts available after-hours